What is the maintenance regulations of the grinder?

 Grinder operator should inspect the grinder and refill the lube before each shift. If there is any unusual phenomenon, no start up the machine and report to the superior in time.

Preparation

1st Check the magnet which is equipped to the output of the grinder feeder, if there is any scrap iron, clean it in time.

2nd Start up the pump, check the circulating water is normal or not.

3rd Refill the lube to the bearing box before start up the grinder. Note: refill the lube for each 12 hours.

4th Clean the cloth bags every shift.

5th Check the magnet, circulating water, lubrication point and the sieve then switch on the main power and the grinder power.

Contact Us

看不清楚,点击刷新